Introducing the main features of Kkeut Clinic's Onda Lifting treatment.

1. Personalized Design and Handpiece Utilization Plan
The director personally formulates the patient's lifting treatment plan. After thoroughly diagnosing areas with insufficient skin elasticity and facial contours that need refinement, 3mm and 7mm handpieces are used appropriately. In particular, areas of concern for volume loss are delicately adjusted, and energy is concentrated and delivered to areas requiring elasticity improvement.

2. Personalized Energy Settings
For full-face treatment, energy is adjusted from 60,000 joules to 120,000 joules. Instead of indiscriminately using high energy, the appropriate energy level is set for each patient, considering their skin condition and desired improvements.

3. Precise Treatment Speed Control
The speed of handpiece movement during Onda device treatment can affect the results. At Kkeut Clinic, the handpiece moves slowly in areas where thermal energy needs to be concentrated and quickly in sensitive skin areas. This ensures that unnecessary heat is not delivered to the skin while striving to achieve the desired improvement effects.

4. Customized Shot Distribution by Area
Beyond simply using 3mm and 7mm handpieces, we precisely analyze the patient's facial volume and fat distribution to meticulously allocate shot energy. For instance, if there is less facial fat, the 3mm handpiece is primarily used, while for those with more fat in the double chin or below the jawline, the proportion of 7mm handpiece usage is increased.

Subtle Differences in Onda Lifting Treatment Method
Kkeut Clinic approaches Onda lifting treatment differently from methods that use a fixed 90W output from the start.
In the initial stages of the treatment, a high output of 100W to 110W is used to quickly reach the target temperature, after which the output is lowered to 90W to proceed with the treatment.

Subtle Changes This Treatment Method Can Bring
Shortening the Tissue Response Time
Even if the same amount of energy is delivered, starting the treatment with a high output causes the tissue temperature in that area to rise more rapidly.
This allows for a quicker accumulation of energy, shortening the time it takes to reach the point where the desired tissue response occurs.
Therefore, the skin tissue can begin to react to heat sooner.

Reduced Energy Loss in the Core Treatment Zone
Delivering energy with high output for a short period is advantageous in reaching the appropriate treatment temperature before thermal energy disperses to surrounding tissues.
This method allows for inducing the desired response primarily in the dermis and subcutaneous fat layers, without causing unnecessary damage to the epidermis.

Enhanced Expected Effects Relative to Treatment Time
If treatment were performed only with a fixed 90W output, it could take longer for skin tissue to reach the point of reacting to heat.
In such cases, the number of treatment shots might need to be increased to achieve an appropriate thermal response.
However, starting the treatment with a high output allows reaching the target thermal energy level in a short time.
Afterward, the output can be appropriately adjusted, further enhancing the safety of the treatment.

Treatment Differences Patients Can Feel
▶ Compared to a 90W-only treatment method
→ You can experience lifting effects more quickly,
→ and your skin may feel firmer immediately after the treatment.
Additionally, by adjusting the output before the heat sensation crosses a certain threshold,
→ we can help prevent excessive pain or discomfort during the treatment.
Thus, even when using the same total energy of 60,000 joules, depending on the output control method,
the treatment results may vary.
At Kkeut Clinic, we carefully approach these subtle differences in treatment methods to achieve better results.

Main Features of Onda Lifting Treatment

Expect Both Lifting and Skin Elasticity Improvement Simultaneously
Onda Lifting uses ultra-short microwave technology with a 2.45GHz frequency. This technology precisely delivers thermal energy to the skin's dermal and subcutaneous fat layers, helping to achieve both lifting effects for sagging areas and tightening effects to improve skin elasticity.
Similar to a microwave oven, this treatment vibrates water molecules in the body to create frictional heat. The generated heat induces collagen contraction, promotes new collagen production, and can also contribute to fat cell decomposition. As a result, a distinctive feature is that you can feel the skin-tightening lifting effect immediately after the treatment.
Microwaves have the characteristic of being absorbed by water within the skin to generate thermal energy. Thanks to this, it can effectively deliver thermal energy selectively to the dermis and subcutaneous fat layers, which are the main areas requiring treatment, while minimizing irritation to the skin surface.
The Onda device offers the advantage of performing both lifting and elasticity improvement treatments simultaneously with a single device.

이 시술 방식이 가져올 수 있는 미세한 변화

조직 반응 시점의 단축

같은 양의 에너지가 전달되더라도, 높은 출력으로 시술을 시작하면 해당 부위 조직 온도가 더 신속하게 상승합니다.

이를 통해 에너지가 충분히 축적되어 원하는 조직 반응이 일어나는 지점까지 도달하는 시간을 단축시킬 수 있습니다.

따라서 피부 조직이 열에 반응을 시작하는 시기가 더 빨라질 수 있습니다.

핵심 시술 구간에서의 에너지 손실 감소

높은 출력으로 짧은 시간 동안 에너지를 전달하면, 열 에너지가 주변 조직으로 분산되기 전에 시술에 필요한 적정 온도에 도달하는 데 유리합니다.

이러한 방식으로 표피에 불필요한 손상을 주지 않으면서, 진피층과 피하지방층에 집중적으로 원하는 반응을 유도할 수 있습니다.

시술 시간 대비 기대 효과 증진

만약 90W 고정 출력만으로 시술한다면, 피부 조직이 열에 반응하는 지점까지 도달하는 데 더 오랜 시간이 걸릴 수 있습니다.

그럴 경우, 적절한 열 반응을 얻기 위해 시술 샷 수가 더 늘어날 수도 있습니다.

하지만 높은 출력으로 시술을 시작하면 짧은 시간 안에 목표하는 열 에너지 레벨에 도달이 가능합니다.

이후에는 출력을 적정하게 조절하여 시술의 안전성을 더욱 향상시켜 드릴 수 있습니다.

환자분들이 느낄 수 있는 시술의 차이

▶ 90W 단독 시술 방식과 비교했을 때

→ 리프팅 효과를 보다 신속하게 체감하실 수 있고,

→ 시술 직후 피부가 더 탄탄해지는 느낌을 받으실 수 있습니다.

또한 열감이 특정 임계점을 넘기기 전에 출력을 조절하기에,

→ 시술 중 과도한 통증이나 불편감이 느껴지지 않도록 도울 수 있습니다.

이처럼 총 6만 줄의 동일한 에너지를 사용하더라도, 출력 조절 방식에 따라

시술 결과는 다르게 나타날 가능성이 있습니다.

끗 한의원에서는 이러한 미묘한 시술 방식의 차이가 보다 나은 결과를 가져올 수 있도록 세심하게 접근하고 있습니다.

온다리프팅 시술의 주요 특징

리프팅과 피부 탄력 개선을 동시에 기대

온다리프팅은 2.45GHz 주파수의 극초단파 마이크로웨이브를 이용합니다. 이 기술은 피부 진피층과 피하지방층에 정밀하게 열에너지를 전달하여, 늘어진 부위를 당기는 리프팅과 피부 탄력을 높이는 타이트닝 효과를 함께 얻을 수 있도록 돕는 시술 장비입니다.

이 시술은 전자레인지와 유사하게 체내 수분 분자를 진동시켜 마찰열을 만듭니다. 발생한 열은 콜라겐의 수축을 유도하고 새로운 콜라겐 생성을 촉진하며, 지방세포 분해에도 관여할 수 있습니다. 덕분에 시술 직후에도 피부가 당겨지는 리프팅 효과를 체감하실 수 있는 점이 특징입니다.

마이크로웨이브는 피부 속 수분에 흡수되어 열 에너지를 생성하는 특징이 있습니다. 이 덕분에 피부 표면에는 자극을 적게 주면서도, 시술이 필요한 주요 부위인 진피층과 피하지방층에만 선택적으로 열 에너지를 효과적으로 전달할 수 있습니다.

온다 장비는 리프팅과 탄력 개선 시술을 하나의 장비로 동시에 진행할 수 있다는 장점을 지닙니다.

Onda Lifting is a procedure designed to simultaneously improve facial contours and skin elasticity.

Key Principles of Onda Lifting

Onda Lifting utilizes two types of handpieces, each designed to work at depths of 3mm and 7mm, respectively.

The 3mm handpiece is responsible for intensely delivering energy to the boundary between the dermis and subcutaneous fat.

When heat is delivered to this depth, it can promote the generation of new collagen and elastin fibers, and also induce hyaluronic acid synthesis. Additionally, existing collagen contracts, which can lead to improved skin elasticity.

For swollen fat layers, the reduction of water due to heat can lead to refined facial contours immediately after the procedure.

The 7mm handpiece targets deeper subcutaneous fat layers, selectively damaging fat cell membranes to induce natural cell apoptosis.

Damaged fat cells are expelled from the body via the lymphatic system, contributing to a more defined facial contour. Changes typically begin to appear after 2-3 weeks, and contour improvement may become more distinct around 4 weeks. Stable results can be observed 6 weeks after the procedure. A key advantage is that once fat cells are destroyed, they do not regenerate, meaning the effects are relatively long-lasting.

In addition, the retaining ligaments are immediately induced to contract, so you can feel a degree of lifting right after the procedure.

Temperature Control: Collagen fibers efficiently contract at temperatures ranging approximately from 60 to 65 degrees Celsius. For the target tissue at the desired depth to reach this temperature, a delicate treatment technique is required, involving slow movement of the handpiece to sufficiently deliver and accumulate thermal energy.

Principle of Selective Water Absorption: Microwave energy has the property of selectively absorbing only water. Thanks to this, there is relatively less irritation to tissues around nerves or blood vessels, and energy can be effectively concentrated only on fat cells and the water layer within the dermis. This selective heating method can reduce discomfort during the procedure and lower the possibility of unnecessary side effects, providing a more comfortable treatment experience.

Lifting Procedures That Offer Synergistic Effects When Combined

While Onda Lifting can be effectively used as a standalone treatment, even better synergistic effects can be achieved when combined with other lifting procedures such as Shurink (targeting the fascial layer) or Oligio (RF tightening).

By combining multiple types of procedures on the same day, the heat accumulation time for each treatment can be optimized, potentially leading to increased post-treatment satisfaction.

Our Medical Team's Treatment Philosophy

Our medical team consistently performs Onda Lifting procedures every day.

Nevertheless, the lifting design tailored for each and every patient is always planned individually and carefully.

Our medical team continuously researches and strives to provide even better results to patients after the procedure.

Beyond simply using equipment, we believe the true essence of lifting lies in meticulously analyzing each skin's characteristics and the harmony of facial contours to precisely design the most suitable contour improvement for each individual.

While the performance of the Onda Lifting device itself is important, the difference in its effectiveness truly manifests from the rich experience and delicate approach of the medical team performing the procedure.

Through such a delicate approach, you can discover the full potential of Onda Lifting.

Why Expect Rapid Changes with Onda Lifting

Onda Lifting uses microwave energy to intensively deliver heat only to tissues located at 3mm and 7mm depths within the skin.

Through this process, collagen fibers are rapidly heated to temperatures exceeding 65 degrees Celsius, which can induce immediate contraction.

Thanks to this, there are cases where changes in lifting effects can be directly felt immediately after the procedure.

Reducing the burden of having to wait a long time for results to appear,

A key feature of Onda Lifting is that you can directly experience improvements in skin elasticity and lifting changes immediately after the procedure.

Therefore, it can be a suitable choice for those who anticipate relatively rapid results.

Distinguishing Features of Onda Lifting

1. Precise Customized Design and Handpiece Application Strategy Before Treatment

Before Onda Lifting treatment, a meticulous design process is of utmost importance.

Our medical team consults directly with patients to comprehensively analyze various factors such as skin elasticity, fat distribution patterns, overall volume, and the direction in which lifting is needed. Based on this, the areas requiring treatment are meticulously planned.

According to these analysis results, the 3mm handpiece, which focuses on stimulating the dermal layer, and the 7mm handpiece, which targets fat reduction, are used appropriately for the specific characteristics of each area during the procedure.

This goes beyond simply using equipment; it becomes a customized lifting procedure that reflects the unique facial characteristics of each individual.

2. Appropriate Energy Delivery and Precise Settings

The effectiveness of Onda Lifting can vary depending on the total amount of energy delivered.

We adjust the necessary energy from 60,000 joules to over 120,000 joules according to the patient's condition. Furthermore, we meticulously establish and apply a cooling strategy to ensure sufficient treatment time and prevent skin overheating.

3. Heat Accumulation Management Through Handpiece Speed Control

To achieve the effects of Onda Lifting, sufficient thermal energy must be accumulated in the treated area.

In the initial stage of the procedure, the medical team moves the handpiece slowly to accumulate heat, and then increases the speed afterward to reduce the possibility of burns, thereby ensuring a safe and effective treatment.

The medical team's extensive experience is crucial for correctly setting up the treatment parameters.

4. Customized Handpiece Application and Shot Strategy Based on Individual Condition

The treatment strategy for an area with a lot of fat on the cheeks and an area with simply decreased skin elasticity should be different.

We carefully examine the patient's facial volume, fat distribution, and skin thickness to determine the optimal ratio of 3mm and 7mm handpiece application.

The 7mm handpiece is primarily used for the jawline with a thick fat layer, while the 3mm handpiece can be more effectively utilized for the area below the cheekbones where cheek hollowing is a concern.

Beyond simply delivering energy, we develop and implement a distribution strategy that is most appropriate for each individual patient.

5. Medical Team's Meticulous Design and Continuous Research

Our medical team continuously gains experience with Onda Lifting treatments.

We customize the treatment design individually for each patient's condition.

Even outside of consultation hours, our medical team consistently researches energy settings and handpiece placement methods to improve treatment efficacy.

While Onda Lifting is a treatment that uses equipment, the results can vary depending on the medical team's ability to design the treatment.

Onda Lifting is not merely a device-based treatment; the completeness of the procedure can vary depending on the medical team's proficiency.

Who is it for?

• 01. Individuals who wish to refine their jawline by improving a double chin or buccal fat.
• 02. Those with prominent nasolabial folds and noticeable skin sagging.
• 03. Individuals who still feel the need for improvement in facial contour or elasticity after previous lifting treatments.
• 04. People in their 30s to 50s experiencing both fat accumulation and decreased elasticity.
• 05. Those who prefer a lifting method with less burden regarding pain or recovery time.

Treatment Characteristics

• 01. Thanks to its cooling function, it helps reduce pain during treatment.
• 02. You can expect a firmer skin appearance after the treatment.
• 03. You can return to your daily life immediately after the treatment with minimal discomfort.

Treatment Process

• STEP 01. After cleansing, a 1:1 customized consultation is conducted with the medical team.
• STEP 02. Oil is carefully applied to the treatment area.
• STEP 03. Onda Lifting treatment is performed based on the medical team's diagnosis.

Post-Treatment Care Instructions

• ㆍYou can cleanse and apply makeup starting the day after the treatment.
• ㆍIt is recommended to avoid saunas, jjimjilbangs (Korean bathhouses), alcohol, and smoking for about a week after the treatment.
• ㆍTemporary warmth or dryness may accompany the treated area. Please make an effort to keep your skin moisturized by consistently applying moisturizer more than usual.
• ㆍWhen going out, it is recommended to meticulously use sunscreen to protect your skin from UV rays.